ARRI Event
ARRI propose également des solutions de ballast dédiées à l’activité événementielle. Les ballasts électroniques intelligents déportés de 19 « sont conçus pour les installations de montage en rack avec distribution d’alimentation multicœur. Ces ballasts s’adaptent parfaitement aux têtes de lampe de la série ARRI Event.
Les ballasts (sauf EB 575 EVENT SINGLE) se composent de trois modules facilement interchangeables et peuvent être commandés manuellement ou via une télécommande DMX. Chaque canal peut être commuté ou atténué à 50% individuellement et les indicateurs du panneau avant indiquent l’état des deux – tête de lampe et ballast.
traits
- Puissance de la lampe et température de couleur constantes pendant la durée de vie de la lampe
- Ballast de montage en rack 19 « (4U)
- Panneau de commande convivial avec boutons de gradation pour chaque canal
- Modules de puissance interchangeables
- Fonctionnement jusqu’à six canaux avec un seul appareil (EB 575 EVENT SIX)
- Fonctionnement sans scintillement
- Boîtes divisées intelligentes
- ALF (Active Line Filter) pour la correction du facteur de puissance
- Gradation sur tous les modèles
Technical Data
ARRI EVENT EB 1200/1800 EVENT THREE |
ARRI EVENT EB 575 EVENT SIX |
ARRI EVENT EB 575 EVENT SIX |
|
Ident-No. | L2.76610.0 | L2.76340.0 | L2.76340HC |
Minimum Order Quantity | – | 20 | 20 |
Line Power | 7800 VA (max.) | 4200 VA (max.) | 4200 VA (max.) |
Supply Voltage | U(LN) = 180 to 250 V~ 50/60 Hz; 3, N, PE (three phase) |
U(LN) = 90 to 135 V~ / 180 to 250 V~ 50/60 Hz; 3, N, PE (three phase) |
U(LN) = 90 to 135 V~ / 180 to 250 V~ 50/60 Hz; 3, N, PE (three phase) |
Nominal Current | 14.5 – 10.5 A (eff., each phase) | 15.6 – 10.8 A / 7.8 – 5.6 A (eff., each phase) | 15.6 – 10.8 A / 7.8 – 5.6 A (eff., each phase) |
Power Factor | cos Φ≈ 0.98 | cos Φ≈ 0.98 | cos Φ≈ 0.98 |
Lamphead connector | Harting HAN 16 | Schaltbau M3 | Harting HAN 16 |
Lamp Power | 3 x 1200 W or 3 x 1800 W | 6 x 575 W / 600 W | 6 x 575 W / 600 W |
Power Adaption | constant control, automatic detection of lamphead and lamp type |
constant control | constant control |
Current Characteristic | square wave, 200 Hz ± 20 Hz | square wave, 200 Hz ± 20 Hz | square wave, 200 Hz ± 20 Hz |
Dimming | 50 to 100 % of nominal lamp power | 50 to 105 % of nominal lamp power | 50 to 105 % of nominal value |
Starting | cold start and hot restrike | cold start and hot restrike | cold start and hot restrike |
Typical Light Ripple | typ. < 3 % | typ. < 3 % | typ. < 3 % |
Dimensions (H x W x L) | 483 (19″) x 177 (4 height units) x 530 mm | 483 (19″) x 177 (4 height units) x 583 mm | 483 (19″) x 177 (4 height units) x 583 mm |
Weight | ca. 24 kg | ca. 22 kg | ca. 22 kg |
Protective Rate | IP20 | IP20 | IP20 |
Ambient Conditions | -10 to +50 °C | -10 to +50 °C | -10 to +50 °C |
Housing | 19″ rack with three exchangeable power modules | 19″ rack with three exchangeable power modules | 19″ rack with three exchangeable power modules |
ON / OFF | X | X | X |
Protective Earth | X | X | X |
Lamp On | X | X | X |
Over Temperature | X | X | X |
Remote / DMX | X | X | X |
Detected Lamp Power | X | ||
Automatic Lamp Recognition | X | ||
Automatic Lamphead Recognition | X | ||
Active Line Filter (ALF) | X | X | X |
Compensation for Cable Loss (CCL) | X | ||
Dimming | X | X | X |
DMX | X | X | X |